Your building runs itself.
Sense every signal. Explain every anomaly. Optimize every load. Learn from every outcome. Continuously. Every 15 minutes.
The problem
Energy management is stuck in the past.
Dashboards don't act
You see a chart. You export a CSV. You schedule a meeting. By then, the spike already hit your bill.
Reports arrive too late
Monthly summaries of problems that started weeks ago. By the time you read it, the next month's problems have started.
Fixes don't stick
A consultant optimizes your schedules. Three months later, overrides and drift have undone half the savings.
The Loop replaces all of it.
One continuous cycle. Sense the state of your building. Explain what's happening and why. Optimize loads autonomously. Learn from every outcome. Then do it again. Every 15 minutes, 24/7.
One cycle
What happens in 15 minutes.
Tuesday, 2:15 AM. Your building is asleep. The Loop isn't. Here's what a single cycle looks like.
Compressor drawing 12% above baseline
Meter data arrives from the Bitzer compressor on Floor 2. Current draw 18.4 kW vs. baseline 16.2 kW for this hour, this ambient temperature, this occupancy level. Flagged as anomaly.
Likely cause: condenser coil fouling
Ambient temperature is normal (23.1°C). Suction pressure elevated. Pattern matches condenser fouling — similar signature to the event in Building C last month. Not an emergency, but efficiency is degrading.
Setpoint adjusted +0.5°C, load shifted to off-peak
Cold store has 2.1°C of thermal headroom. Pre-cool schedule moved earlier to capture remaining off-peak rates. Compressor duty cycle reduced 8% while maintaining food safety. Estimated saving: $14 tonight.
Baseline updated, maintenance flagged
Predicted impact: $14. Actual measured: $12.80. Model adjusted. Condenser fouling trend logged — maintenance ticket recommendation queued for morning. Next cycle: baselines now reflect the updated compressor profile.
This happened while everyone was asleep. By morning, the facility manager sees a one-line summary: “Compressor efficiency drifting — maintenance recommended. $14 saved overnight via thermal shift.”
Four phases
Each phase feeds the next. Nothing runs in isolation.
Sense builds the picture. Explain makes it understandable. Optimize takes action. Learn makes everything better. Then it starts again.
Sense
Foundation
Connects to every meter, sensor, EV charger, weather feed, tariff schedule, and BMS in your building. Normalizes everything into one unified model updated continuously.
Explain
Intelligence
Ask anything in plain English. Why did costs spike? Which asset is underperforming? What changed since last week? Answers with data, context, and recommendations.
Optimize
Action
Automated peak shaving, pre-conditioning, EV scheduling, and load shifting. Every decision logged, every action explained, every outcome measured.
Learn
Improvement
Every prediction compared to reality. Baselines sharpen week by week. Seasonal patterns recognized. The system that runs your building today is better than last month.
Compounding intelligence
Most systems decay. This one compounds.
Traditional optimization is a one-time event. Someone configures schedules, the consultant leaves, and performance drifts. The Loop is different — it runs continuously and gets better with every cycle.
Baselines established
- Every asset profiled
- Normal patterns mapped
- First optimizations running
- Anomaly detection active
Patterns sharpened
- Weekday vs weekend learned
- Delivery schedules adapted to
- Seasonal drift detected early
- Optimization accuracy improving
Fully autonomous
- Predictions within 3% of reality
- Seasonal models calibrated
- Rare events handled confidently
- Savings compounding monthly
Prediction accuracy is measured as the match between forecasted and actual load profiles.
The shift.
From fragmented and reactive to unified and autonomous.
Without The Loop
- Five dashboards, none connected
- Monthly reports, weeks too late
- Manual investigation per anomaly
- Consultant optimizes once a year
- Savings drift away within months
- Questions take days to answer
With The Loop
- One system, every asset unified
- Continuous — every 15 minutes
- Anomalies explained automatically
- Optimization runs 24/7, autonomously
- Savings compound month over month
- Ask anything, answer in seconds
See The Loop running on your building.
Not a demo environment. Your facility. Your data. Real signals. Connect in days, not months.
Talk to usOr email hello@wattif.io